Adsense Not Working 7.03

Im using  7.0.3   trunk-14624

and when i ad adsense blocks

i can see only working the firstone

 

i made 4 block and only the frist works

if i deativate the frist one

the one bellow  imediatlly starts to work

and the other 2 stil keep not working

 

 

anyone can reproduce  this?

Quote · 16 Nov 2010

strange  in user profiles  i have 2 adsense blocks

one on top

other down below

 

the 2 work 100%

Quote · 16 Nov 2010

check in the database on the blocks you have created and make sure there are no added characters to your adsense source.

When a GIG is not enough --> Terabyte Dolphin Technical Support - Server Management and Support
Quote · 16 Nov 2010

If I'm not wrong there is a maximum of 3 adsense blocks allowed for every page (this is a rule by Google itself).

I would start removing completely a couple of blocks and see if the 2 left are working.

Only in the case I would then add the 3rd one.

I hope that this helps,

Cheers,

 

Quote · 16 Nov 2010

 

If I'm not wrong there is a maximum of 3 adsense blocks allowed for every page (this is a rule by Google itself).

I would start removing completely a couple of blocks and see if the 2 left are working.

Only in the case I would then add the 3rd one.

I hope that this helps,

Cheers,

 

Your correct AlexG  there is a limit of three "Add Units" and three "Link Units" two "Searche Boxes"

taken from Google https://www.google.com/adsense/support/bin/answer.py?hl=en&answer=10541

Keep in mind that in addition to three standard AdSense for content ad units, you're also welcome to add more units to your pages. On any page, you can place:

  • three standard ad units
  • three link units
  • two search boxes
ManOfTeal.COM a Proud UNA site, six years running strong!
Quote · 17 Nov 2010

Funy

this just happens in   homepage

profile, photos  work good with 3 ads

 

im only using 2 ads now in homepage

and only one is working, always the first one

when i take the first block the second stars to work imediatly

 

the code in the  database is 100%  ok

anyone ca reproduce this?

Quote · 17 Nov 2010

Could someone give a solution to this please. I am using 7.0.3 and added a html block, clicked on the little html source and pasted my google code. It has been over 2 hours and I cleared all my cache and waited but nothing is showing. Its seems like when I paste the adsense code and save, everything looks fine but when I go to the code again to check, the code seems to have changed itself. I am not sure what to do. I have searched the forum but have not found a fix. Could someone please tell me how I can fix it, or point me to the correct forum post.

P.s. I have it on my homepage. Did it through admin-builders-page blocks. Just to mention, that I only have 1 adsense block.

Thank you all in advance

Quote · 26 Dec 2010

I found it myself. Go find the block on phpmyadmin and edit the code there. Then clear your cache and wait a little while and it should show. Otherwise, it would not show just doing it through admin, still not sure why.

Quote · 26 Dec 2010
 
 
Below is the legacy version of the Boonex site, maintained for Dolphin.Pro 7.x support.
The new Dolphin solution is powered by UNA Community Management System.