It was working fine with the 7.0.1, i just upgrade and ... bad surprise this morning, no way to embeb a video from youtube, allways the msg "Video upload failed (Video error)"
...
any solution ?
7.0.2 : embeb video (youtube) not working anymore
 |
Hello! Ffmpeg was upgraded too, so check permissions for flash/modules/global/app/ffmpeg.exe, should be 777. Also need to change this file if u have Windows server. Regard |
755 is enough. I don't see any point of writing to that file. |
Done but change nothing :( |
I have the same problems in 7.0.2 its not working, video upload error as result.!! Kids first |
Hello! And I have such problem. I tried all which was written here. Any kind of links don't work. Please, anybody, who has membership "Premium" write about it at trunk. I tried but I don't have enough permissions. Thanks beforehand. |
I have no longer access seems to the new ticket, so some others please!! Kids first |
having the same, worked in previous versions but not in 7.02. Also mail editor got once fixed with the annoying space n space issue by Sasha Seems to be an issue for many here. |
having the same, worked in previous versions but not in 7.02. Also mail editor got once fixed with the annoying space n space issue by Sasha Seems to be an issue for many here. what space do you mean? get me an example PS: If possible do not write me personally, please try to ask on the forum first |
I upgraded from 7.0.1 to 7.0.2 and I'm having no problems with video at all. Did you add a modification in 7.0.0 or 7.0.1 to videos?
|
Did you add a modification in 7.0.0 or 7.0.1 to videos? No, i use original script |
Me to. I have tryed to upload different formats, small en big video's, embed... every time the same video upload error.. In my other 7.0.1 sites no problem . Kids first |
Hello now I can embed YouTube videos. I've found the mistake which I did. I did changes in flash/modules/video/inc/function.inc.php to get thumbnail of the video later then to 2 seconds from the beginning. In the functions grabImages and getGrabImageTmpl I changed variables $iSecond = 0 to $iSecond = 2. Now I left $iSecond = 2 only in function grabImages. In the function getGrabImageTmpl I returned $iSecond = 0. That's all and everything is OK I can embed videos and I can get thumbs from video's 2nd second (it means now I will never get black thumbnails from some videos, which has black frames in the begining) And you try remember if you changed files which belongs video module. Regards. |
the problem is with 0.2 for sure, i get no problem with 0.1 neither ... I check again all permission ... but still the same result. Please, help someone ... |
Thanks for your kind attention. I wasn't able to post here for 2 days. Hopefully it works now. Sasha, there's no problem within CB mails but when forwarded the mail appear like Hello n how are u? n Regards |
I don't get the last post wich is not in the good post i think ... Anyway, sasha or somebody else, please have a look o this isue, open a ticket or whatevr, but its look like we are couple people (customers) wich have this isue and wich will be happy to have a solution :) |
a little "up" to this isue, can be great to have a ticket on it because it's look like it's fail on every dolphin 0.2 ... |
I don't see any fix for this in the near future. Not with this many threads and no resolution to be found so far. It looks like a few tickets were opened, then promptly closed on it. |
Hello everybody! One trouble of the Youtube's playing was fixed at this ticket http://www.boonex.com/trac/dolphin/ticket/2074 So u may apply this fix http://www.boonex.com/trac/dolphin/changeset/14144 and check - was it helpful for ur trouble. Regard |
Youtube Embed Failed in 7.0.2 is a pain ! Any one solved this problem ! Let me know ! Thanks ... Note : With no youtube embed working fine , dolphin become useless ... . Proud Hosted by Zarconia.net |
Sorry this patch is not working at my site under 7.0.2 like I have write ealier with sites under 7.0.1 on the the same server no problems. Hello everybody! One trouble of the Youtube's playing was fixed at this ticket http://www.boonex.com/trac/dolphin/ticket/2074 So u may apply this fix http://www.boonex.com/trac/dolphin/changeset/14144 and check - was it helpful for ur trouble. Regard Kids first |
just gone up to 7.0.2 and not working for me now :-( |
Hello killerhaai!
Yes, 7.0.1 had another syntax of this part. In 7.0.2 i made some unification, but not correctly for Video module, that's why Youtube video was broken.
So this ticket fixed this trouble - u may see repaired example here
http://www.boonex.us/m/groups/view/Films-about-sharks).
U may provide me via Unity mail accesses (FTP/CPanel, admin access) and i'll check ur site directly.
Regards |
Not working on 0.2 and 0.3, working on 0.1 on the same server ... Please, give me a solution :( |
Not working on 0.2 and 0.3, working on 0.1 on the same server ... Please, give me a solution :( same problem too ... After upgrading give me Video Error if i try to embeds video from youtube. FFmpeg output nothing :X see http://boji-dar.info/test_ffmpeg.php Please add solution |
I'm having this problem also, my host states they don't allow ffmpeg.exe because it takes up to much space! But it was working before... My server claims they don't allow this. I change the permissions to 777 and now is fine, but I'm not sure how long my host will let me use this...
Bill |
ok ... i am agree to pay for the expert wich can solve this isue ... it's begin to be long isue and i am a bit fedup to don't be able to propose youtube to my users ... :( |
I copy the ffmpeg.exe from the vesrion 7.0.1 and ... it's working :) |
I have the same issues with 7.0.3 Have not gotten any video from you tube to embed. I did a fresh install with 7.0.3 and never have gotten it to work for me. You possess an intuitive intelligence so powerful it can help you heal, and relieve stress. |
Have solution about this problem. Dolphin 7.03 ???? Please very much add something to solve this problem, i need youtube embed video module to work! |
guys, i am not sure what is going on, but I tested this on a fresh install of 7.0.3 there seems to be somewhat of a glitch where you need to click on the page itself the continue button is dimmed, but if you click beside the continue button, it will activate the button, then you can click the continue and it will embed the video.
i have tested with a few videos (4) Add Videos Choose uploader - Embed (keeping in mind that you have to have the string in the correct format) --> once i enter the url with the correct format, the continue button is dimmed, clicking beside the continue button will activate the button, and you are able to proceed.
lightwolf, let me know if you are able to get this working?
When a GIG is not enough --> Terabyte Dolphin Technical Support - Server Management and Support |
guys, i am not sure what is going on, but I tested this on a fresh install of 7.0.3 there seems to be somewhat of a glitch where you need to click on the page itself the continue button is dimmed, but if you click beside the continue button, it will activate the button, then you can click the continue and it will embed the video.
i have tested with a few videos (4) Add Videos Choose uploader - Embed (keeping in mind that you have to have the string in the correct format) --> once i enter the url with the correct format, the continue button is dimmed, clicking beside the continue button will activate the button, and you are able to proceed.
lightwolf, let me know if you are able to get this working?
It worked before that way for me until 7.01 and since then no chance to embed youtube. No idea what that could be. Video comment is also goneat the same time. |
***FIXED**** (for me anyway) Thanks to the suggestion of unlimeet.
I have spent at least 4 hours today pouring through these forums and searching the internet to find a fix for this issue. I was about to give up. But unlimeet mentioned, in one brief sentence, that they replaced the ffmpeg.exe file with the one from 7.0.1. So after running some errands today. I got home and searched for a copy of 7.0.1 (wasn't easy for me to find). I replaced my 7.0.3 ffmpeg.exe file with the one from 7.0.1. And wouldn't you know.... I can now embed videos from YouTube. I could always embed them in a blog post or article, I just kept getting the dreaded "video upload failed" message when trying to embed one in the video section of a profile. Hope the fix works for you too. |
the irony of that is, i dont even believe that ffmpeg is used for the embed method, there is no reason to convert, because its not actually an embed, its a stream.... i would like you to put your updated ffmpeg back and lets test this further. ***FIXED**** (for me anyway) Thanks to the suggestion of unlimeet.
I have spent at least 4 hours today pouring through these forums and searching the internet to find a fix for this issue. I was about to give up. But unlimeet mentioned, in one brief sentence, that they replaced the ffmpeg.exe file with the one from 7.0.1. So after running some errands today. I got home and searched for a copy of 7.0.1 (wasn't easy for me to find). I replaced my 7.0.3 ffmpeg.exe file with the one from 7.0.1. And wouldn't you know.... I can now embed videos from YouTube. I could always embed them in a blog post or article, I just kept getting the dreaded "video upload failed" message when trying to embed one in the video section of a profile. Hope the fix works for you too.
When a GIG is not enough --> Terabyte Dolphin Technical Support - Server Management and Support |
OK... I'll put the original 7.0.3 ffmpeg.exe file back in and I'll let you know the result. |
OK... here's the result with the 7.0.3 ffmpeg.exe reloaded back on my server. |
And here is after changing the ffmpeg.exe back to the 7.0.1 version. |
Notice the time the file was uploaded and the size of the file. It's smaller than the 7.0.3 version. |
Notice the time the file was uploaded and the size of the file. It's smaller than the 7.0.3 version. ok, but still not convinced... will you take the http:// off your url and let me see that?
When a GIG is not enough --> Terabyte Dolphin Technical Support - Server Management and Support |
Have to agree with DosDawg here.. ffmpeg has nothing to do with YouTube video embeds.. This is specifically for converting videos. Only thing I am not totally sure about is whether the ffmpeg is used to actually "play" the videos on your site, but I do know its not used to embed them.. Nothing to see here |
yeah thats kewl about the file size. but we wont get into the logistics and dynamics of streaming media on this thread. Notice the time the file was uploaded and the size of the file. It's smaller than the 7.0.3 version. here is the deal, and i am going to try myself on my site. i think you can remove ffmpeg.exe and the youtube stream will still work, because you are not doing an embed..... When a GIG is not enough --> Terabyte Dolphin Technical Support - Server Management and Support |
Confused about the "take the http:// of your URL" question. Not sure what you're asking. I understand what your saying but through deduction, the ffmpeg.exe file is what it seems to come down to (for me). All things being the same, save that file, it either works with the older version or it doesn't with the newer version. The only reason I mentioned the file size and time stamp was to show that it was not the 7.0.3 file. I don't know much at all about the file myself but it is possible that ffmpeg.exe is being invoked when you click "continue" and it really shouldn't be? And this particular version has trouble understanding that it should stand down when embedding into the video section? When I place YouTubes embed code in a blog post the embed works file regardless of which ffmpeg.exe file I use. So I know it doesn't have anything to do with streaming the file. But something goes haywire when trying to embed in the video section with the newer file. |
Confused about the "take the http:// of your URL" comment. I understand what your saying but through deduction, the ffmpeg.exe file is what it seems to come down to. The only reason I mentioned the file size and time stamp was to show that it was not the 7.0.3 file. I don't know much at all about the file myself but it is possible that ffmpeg.exe is being invoked when you click "continue" and it really shouldn't be? And this particular version has trouble understanding that it should stand down when embedding? i removed ffmepg from my flash modules and uploaded. please give it a try... well i wanted to see the ending string on that url.... and didnt want the http:// part posted here on the forums. give it a test, remove ffmpeg, use the embed option, and let us know the skinny When a GIG is not enough --> Terabyte Dolphin Technical Support - Server Management and Support |
Confused about the "take the http:// of your URL" comment. I understand what your saying but through deduction, the ffmpeg.exe file is what it seems to come down to. The only reason I mentioned the file size and time stamp was to show that it was not the 7.0.3 file. I don't know much at all about the file myself but it is possible that ffmpeg.exe is being invoked when you click "continue" and it really shouldn't be? And this particular version has trouble understanding that it should stand down when embedding? i removed ffmepg from my flash modules and uploaded. please give it a try... well i wanted to see the ending string on that url.... and didnt want the http:// part posted here on the forums. give it a test, remove ffmpeg, use the embed option, and let us know the skinny I trust you. And in that case, then the older version doesn't fix the problem, it's just that the newer version causes the problem (at least on my server). And I would bet that the other people that are having the same problem could remove the file and it would fix their embed problems as well. |
Here's another question though.... When I swiched the files when you asked me to and the newer one didn't work, I then switched back to the older version, which didn't work either. I thought I lost my ability to embed again. The I realized that I didn't have my permissions set to 777. Switched permissions back to 777 on the old file and walah! It worked again. So, at least on my server, something is going on with that file. |
Okay... i just removed the file and I got the message that said, "video upload failed" again. So, maybe it something to do with my server. All I know is this... With new file = no go (no matter what permissions I use on it) With old file = works (only with permission set to 777) Without file = no go I don't claim to understand why it works like this and I understand your argument that ffmpeg.exe shouldn't have anything to do with embedding videos in the video section. I'm absolutely positive that you know more about that stuff than I do. But what am I to think about the results I am getting? I think I'm not going to think to much about it and just go with what works. |
BTW - just added the file back and it works again.
Now I just wish I could figure out how to disable video uploading on wall posts. Any suggestions? I'd like to be embed only as well. |
I am having the same problem as DosDawg... I copy the youtube embed but I have to click to the right of the continue button before it is available... Any fix? Most users think it is broken because who would think you had to do this?? Thanks
ohh this is with 7.0.6 so I thought it would be fixed by now?? -barry |
This is with 7.0.6 so I thought it would be fixed in stock by now??
-barry |
DosDawg did you ever get this fixed on your site? Having the same problem as you on my site.
-barry |
Could I get a official response.. Please no offense ... But I get far greater support or engagement on open source projects that are free... I have spent what I consider to be a large amount of money on boonex lic ... modules .. and help ... This appears to be a bug that other people have complained about and either the answer is obvious and didn't need stating or it hasn't been fixed.. I am in the final leg of my project and it would seem at least to me that all the stock features should work or be addressable in a product versioned 7.0.X.... If I was a boonex employee I would be curious at a problem like this that seems to be present from a 7.0.2 version and is present in a 7.0.6 progressive version. I have thrown away almost half of my purchased module due to lack of support and bugs... I would hope the part of boonex you actually control (dolphin) would at least get some priority of attention. It behoves me that I can post a question on the samba , apache , pfsense , monowall , joomla , wordpress , snort , and linux kernel mailing list and get at least pointed in the right direction , but yet a sudo open source product I paid for I can't even get a single response from the "community" ..... This "eco-system" sucks.... You have proven at least that.... I will fix it myself like I have done with countless dolphin problems...... Thanks
-barry |
It's still present in 7.0.9 I can't embed Youtube videos at all. So annoying that something as simple as an embed is such a thorn in my side. |
You can try to use old embed code, it should work: Rules → http://www.boonex.com/terms |
Below is the legacy version of the Boonex site, maintained for Dolphin.Pro 7.x support.
The new Dolphin solution is powered by UNA Community Management System.
The new Dolphin solution is powered by UNA Community Management System.