Unregister Quiz from AntonLV

Hello everybody.
This is a support forum for our Unregister Quiz module.
If you have some questions or suggestions regarding it feel free to post them here or contact us directly.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 17 Aug 2012

Hello everybody.
The module was updated. It's available for Dolphin 7.1 now.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 7 Nov 2012

Hello
The module was updated. Some minor issues in the version for Dolphin 7.1 were fixed.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 6 Dec 2012

I now have two unregister links on my member's pages... 

How do I make the other one not visible.

Thanks!

Peer

Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 3 Sep 2013

Disregard, I found it...

It was under menu builder.

Peer

Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 3 Sep 2013

Hello Peer

Disregard, I found it...

It was under menu builder.

Peer

 It's great that the problem was resolved. :)

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 4 Sep 2013

I love this product- except I have not had anybody leave yet... :)

P.

Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 4 Sep 2013

 Hello

I love this product- except I have not had anybody leave yet... :)

P.

Thanks. I hope you'll have as less unregistered members as it's possible. :)

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 4 Sep 2013

I had one user unregister...

However, the below screen was blank...

See attached.

Peer

blankscreen.png · 287K · 444 views
Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 17 Sep 2013

 Hello

I had one user unregister...

However, the below screen was blank...

See attached.

Peer

 Could you please provide me (via PM) with FTP and Dolphin admin panel access info that I can check.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 18 Sep 2013

Anton, again I love this product... The pie chart is great, etc... 

However, Smile on your next release, could you include the reason for leaving in the stats page? The reason for me is I would like to be able to see are we losing males, females, age? and their reason for leaving... :)

reasonforleaving.jpg · 49.9K · 443 views
Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 30 Sep 2013

Hello 

Anton, again I love this product... The pie chart is great, etc... 

However, Smile on your next release, could you include the reason for leaving in the stats page? The reason for me is I would like to be able to see are we losing males, females, age? and their reason for leaving... :)

Thanks! :)
It's not so hard to do. So, you may contact me via PM and I would be able to do it for you as custom modification.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 2 Oct 2013

Done...

do I collect a royalty for my suggestion? :D

Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 2 Oct 2013

Hello everybody.

The module was updated. Version 1.0.1 is available now.

New in 1.0.1 update:

Uregister reason was added on module's adminministration panel -> unregistered tab.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 3 Oct 2013

 Hello

Done...

do I collect a royalty for my suggestion? :D

 Thank you for the suggestion! You just got the updated version without long waiting. :)

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 3 Oct 2013

OK- Anton gets 10 stars for support! He understands business management... :)

Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 3 Oct 2013

One more question.. I deleted the test removals we did from the database tables, via myPHPAdmin  so we now only have one official member who left, and thank god he said he would be back... that is why I wanted to find out what the reason for leaving was on the report.. :) However the pie chart still show a total of five users who have left... 

How do I update the pie chart to reflect the current user count? I recompiled language, flushed cache, even deleted cache from ftp. Still show five users in the pie chart... the report is correct with just one user.

Screenshots attached.

onlyone.jpg · 36K · 456 views
showsmorethanone.jpg · 40.2K · 449 views
Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 3 Oct 2013

 Hello

One more question.. I deleted the test removals we did from the database tables, via myPHPAdmin  so we now only have one official member who left, and thank god he said he would be back... that is why I wanted to find out what the reason for leaving was on the report.. :) However the pie chart still show a total of five users who have left... 

How do I update the pie chart to reflect the current user count? I recompiled language, flushed cache, even deleted cache from ftp. Still show five users in the pie chart... the report is correct with just one user.

Screenshots attached.

Looks like you didn't fully cleaned the data about test removals from database using phpMyAdmin. :) You need to remove unnecessary rows from aqb_unr_users and aqb_unr_users2entries DB tables.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 4 Oct 2013

Anton-

Thanks for your help on this.

Attached are screenshots showing only two members in the tables , yet the pie chart still shows 5.

Thanks!

Peer

abq_unr_users.jpg · 130K · 402 views
abq_unr_users2entries.jpg · 100.2K · 447 views
Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 7 Oct 2013

 Hello

Anton-

Thanks for your help on this.

Attached are screenshots showing only two members in the tables , yet the pie chart still shows 5.

Thanks!

Peer

OK. Looks like I found the reason of the issue. aqb_unr_entries table has counter for each entry (unregister quiz question). These counters collect statistics and are used to print the pie. So, if you manually removed some members from aqb_unr_users and aqb_unr_users2entries tables then you need manually update that counters to have appropriate statistics.

P.S. It's not so good prectice to do the changes manually in the database. It may cause a lot of issues. :)

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 8 Oct 2013

I didn't see any other way to clean up the application... of course it wont be necessary going forward :)

Thanks!

Peer

Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 8 Oct 2013

done... thanks! I did not notice the count field...

 

:)

Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 8 Oct 2013

 Hello

done... thanks! I did not notice the count field...

:)

You are welcome! :)

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 9 Oct 2013

I would like to stress again how important this module is for your site... 

  1. You need to know why your customers are leaving.
  2. You can capture and retain their email for future correspondence.

This software allows you to do all of this...

P.

Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 11 Oct 2013

Anton-

I am doing some year end reconciliation of applications and updates. etc.

boonex shows version 1.0.1 and my control panel shows 1.0 even after uploading the latest download, recompile languages, delete temp files, etcl.

 

unreg-version-boonex.png · 44.9K · 449 views
unreg-version-question.png · 187.8K · 429 views
Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 5 Jan 2014

Hello 

I would like to stress again how important this module is for your site... 

  1. You need to know why your customers are leaving.
  2. You can capture and retain their email for future correspondence.

This software allows you to do all of this...

Thank you very much to pay attention to this module. We greatly appreciate it. :)

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 6 Jan 2014

 Hello again.

Anton-

I am doing some year end reconciliation of applications and updates. etc.

boonex shows version 1.0.1 and my control panel shows 1.0 even after uploading the latest download, recompile languages, delete temp files, etcl.

 

I changed version to 1.0.1 here when added support for Dolphin 7.1 but looks like I forgot to update config file in the module itself. Thanks to let me know.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 6 Jan 2014

I was wondering if you could add the fields

date joined as an option here.

this way we can see how long somebody has actually stayed a member.

Thanks!

Peer

Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 27 Mar 2014

 Hello Peer

I was wondering if you could add the fields

date joined as an option here.

this way we can see how long somebody has actually stayed a member.

Thanks!

Peer

You may easily do it by yourself. :) Edit modules/aqb/unregister/classes/AqbUnrDb.php file and find the following line

return $this->getPairs("SELECT `ID`, `Name` FROM `sys_profile_fields` WHERE `Type` IN ('text', 'select_one', 'date') ORDER BY `ID` ASC", "ID", "Name");

then replace it with this one

return $this->getPairs("SELECT `ID`, `Name` FROM `sys_profile_fields` WHERE `Type` IN ('text', 'select_one', 'date') OR `Name` IN ('DateReg') ORDER BY `ID` ASC", "ID", "Name"); 

That's all! :)

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 28 Mar 2014

Totally rockin' AWESOME!!!!

Love it...

P.

Peer L. Plaut Executive Director, Single Booklovers Connecting Bookworms Since 1970
Quote · 3 Apr 2014

I am re building my site with 7.3.. This module says 7.3 but when downloaded and opened it.. There is only 7.0 and 7.1 files?

Do I use the 7.1 for a 7.3 site?

Quote · 25 May 2016

Hello 

I am re building my site with 7.3.. This module says 7.3 but when downloaded and opened it.. There is only 7.0 and 7.1 files?

Do I use the 7.1 for a 7.3 site?

Yes, you need to use the one from 'for Dolphin 7.1.x' folder. It's compatible with the latest Dolphin 7.3.

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 26 May 2016

Thanks Anton.. Works great

Quote · 27 May 2016

 Hello

Thanks Anton.. Works great

You are welcome! :) 

Best Regards AntonLV - http://www.boonex.com/market/posts/AntonLV
Quote · 27 May 2016
 
 
Below is the legacy version of the Boonex site, maintained for Dolphin.Pro 7.x support.
The new Dolphin solution is powered by UNA Community Management System.